Channel: bigclivedotcom

Category: Science & Technology

Tags: linearneonlinecustomsignlow voltageledtrianglesquaretubestripdiyflexsafecircleframe

Description: LED neon or LED flex is a very handy material for creating neon-like signage and effects. As time goes on it's harder to find places that still make traditional glass neon. This is largely due to the advances made with LED technology providing a safe low voltage alternative for illumination of channel letters signs, and novel materials like this that emulate the traditional linear lines of neon. Cost is a major factor too. While the LED neon flex won't last as long as a properly processed neon tube, it is easier to drive and much more tolerant of rough handling. This project uses short pieces of LED neon flex to create very punchy looking geometric shapes. It's perfect for using up residual scraps from other projects. To make a frame, copy and paste one of the scripts at the bottom of this description area into openscad, a free piece of open source software written by mathematical wizards. It allows you to describe 3D objects as text. That makes it very easy to adjust parameters to make custom STL files for using with your choice of slicer software (converts an STL file to a 3D printable form), and then print them with your 3D printer of choice. Neon frame openscad scripts. Circle, triangle and square. Make sure you leave the "=" and ";" intact when adjusting variables - they are needed by the software:- //LED neon circle frame //Two main adjustable variables thick=5; //thickness of LED neon diam=121; //diameter of circular frame //More specialist variables wall=1.2; //wall thickness height=6; //depth of groove $fn=100; //circle segments //Don't change variables below here wl=wall*2; thk=thick*2; radius=diam/2; difference(){ //main disk cylinder(h=height+1, d=diam); //central void translate([0,0,-1]) cylinder(h=height+2, d=diam-thk-(wall*4)); //cable hole translate([0,radius-wall-(thick/2),-1]) cylinder(h=height+2, d=thick-1); difference(){ //channel groove outer dimension translate([0,0,1]) cylinder(h=height+1, d=diam-wl); //channel groove inner dimension translate([0,0,-1]) cylinder(h=height+1, d=diam-wl-thk); } } //LED neon triangle frame //Adjust these main variables to suit thick=5; //width of LED groove width=150; //width of frame //More specialist variables height=6; //depth of LED groove wall=1.2; //wall thickness curve=20; //corner outer radius $fn=100; //circle segments //Don't change variables below here wl=wall*2; crv=curve*2; thk=thick*2; crz=(width/2)-curve; tri=crz*1.732-crz; //peak of triangle difference(){ //main disk hull() { translate([-crz,crz,0]) cylinder(h=height+1, d=crv); translate([crz,crz,0]) cylinder(h=height+1, d=crv); translate([0,-tri,0]) cylinder(h=height+1, d=crv); } //central void hull() { translate([-crz,crz,-1]) cylinder(h=height+3, d=crv-wl-wl-thk); translate([crz,crz,-1]) cylinder(h=height+3, d=crv-wl-wl-thk); translate([0,-tri,-1]) cylinder(h=height+3, d=crv-wl-wl-thk); } //cable hole translate([0,(width/2)-wall-(thick/2),-1]) cylinder(h=height+2, d=thick-1); difference(){ //channel groove outer dimension hull() { translate([-crz,crz,1]) cylinder(h=height+1, d=crv-wl); translate([crz,crz,1]) cylinder(h=height+1, d=crv-wl); translate([0,-tri,1]) cylinder(h=height+1, d=crv-wl); } //channel groove inner dimension hull() { translate([-crz,crz,1]) cylinder(h=height+1, d=crv-wl-thk); translate([crz,crz,1]) cylinder(h=height+1, d=crv-wl-thk); translate([0,-tri,1]) cylinder(h=height+1, d=crv-wl-thk); } } } //LED neon square frame //Adjust these main variables to suit thick=5; //thickness of LED neon strip width=100; //width of frame //More specialist variables height=6; //depth of groove wall=1.2; //wall thickness curve=20; //corner outer radius $fn=100; //circle segments //Don't change variables below here wl=wall*2; crv=curve*2; thk=thick*2; crz=(width/2)-curve; difference(){ //main frame hull() { translate([-crz,crz,0]) cylinder(h=height+1, d=crv); translate([crz,crz,0]) cylinder(h=height+1, d=crv); translate([-crz,-crz,0]) cylinder(h=height+1, d=crv); translate([crz,-crz,0]) cylinder(h=height+1, d=crv); } //central void hull() { translate([-crz,crz,-1]) cylinder(h=height+3, d=crv-wl-wl-thk); translate([crz,crz,-1]) cylinder(h=height+3, d=crv-wl-wl-thk); translate([-crz,-crz,-1]) cylinder(h=height+3, d=crv-wl-wl-thk); translate([crz,-crz,-1]) cylinder(h=height+3, d=crv-wl-wl-thk); } //cable hole translate([0,(width/2)-wall-(thick/2),-1]) cylinder(h=height+2, d=thick-1); difference(){ //channel groove outer hull() { translate([-crz,crz,1]) cylinder(h=height+1, d=crv-wl); translate([crz,crz,1]) cylinder(h=height+1, d=crv-wl); translate([-crz,-crz,1]) cylinder(h=height+1, d=crv-wl); translate([crz,-crz,1]) cylinder(h=height+1, d=crv-wl); } //channel groove inner hull() { translate([-crz,crz,1]) cylinder(h=height+1, d=crv-wl-thk); translate([crz,crz,1]) cylinder(h=height+1, d=crv-wl-thk); translate([-crz,-crz,1]) cylinder(h=height+1, d=crv-wl-thk); translate([crz,-crz,1]) cylinder(h=height+1, d=crv-wl-thk); } } }