Channel: my mechanics

Category: Education

Tags: how toawesome restorationwelding steelmetal workasmr restorationhow to turn steel blacksandblastingperfect restorationantique hand cranked hammer drill - restorationmy mechanicsusing a manual latherawlplug hammer drillhow to remove rustmachinistheat shrink tubebroken tool repairbluing steelmy mechanics restorationmechanical asmrrawlplug mechanical hammerusing a manual milling maschinewood turningantique toolsasmrvintage tools

Description: It was in spring this year when I picked up this beaten up antique hand cranked hammer drill. My friend has found it on the steel waste together with the german „Weltrekord“ ratchet screwdriver. The condition of the drill was super bad. It was very corroded, had a lot of missing screws, the handle was in very bad condition and the crank was bent so much you couldn't even make a full turn. That's all said, it was the perfect item for a new restoration video. At first I thought this should be a quick and easy project, but one problem after the other became visible and it turned out to be a real challenge. There was the big dent in the left side of the case. Usually you can't bend casted parts, but with a bit of heat and careful pressure on the arbor press I was able to remove it a bit. It also worked to get rid of the warping with some heat. For the finish of the housing I wanted to have an antique cast aluminium look. I thought it would look very cool if I could tumbler these parts after sandblasting. I ended up building a huge rotary tumbler from scratch and it worked very well (video link below). Another big issue was the tool holder and the drill bit, as they were both completly rusted. Big thanks to @Hand Tool Rescue at this point for helping me out with the dimensions on these two parts by disassembling and measuring his own hammer drill. After a bit of search on eBay I found a set of original Rawlplug drill bits. After they arrived I was able to measure the shaft and the taper of the drill to then turn a new tool holder. It all worked out very well and yes, the drill only holds with the taper ;-) Before I even started this project I just had one question in mind „How am I going to replace the messed up handle cover?“. My first idea was to wrap it in nice black leather like steering wheels are made. That would definitely work, but that's something I've never done before so I was quite sceptical. Then the idea of a heat shrink tube came up. That would be a very easy solution, but heat shrink tubes don't have any structuires to it and it wouldn't quite fit the the rest of the tool. Thanks to the research of my Patreons and channel members, they have found very special heat shrink tubes that have a structure in it. I really liked it as it almost looked exactly the same like the original handle. After all it was a very intense and time consuming project. I've done so many hours of research on this one and I had to learn new skills. I'm very happy how it turned out. I hope you like my work and the video. Huge thank you to all of my Patreon supporters and specially to: Tonya M Broerman Zack Thompson Adel AlSaffar afreeflyingsoul Yale Baker Gregory Alex McGeorge Alistair Moor Amar.k Bendurion Courtney Maleport David Barker Greg Marston Joshua Bentley Lambda GPU Workstations Luke Schmick Luke Stone Matt Bosch Mellissa Marcus Mike Schlodder Monte Gibbs Muzaffer Aksoy Nick Houston Paul Mampilly potokslow Todd Medbury Vickie Bligh Vince Valenti Xavier Carbel Yuri Zapuchlak Aaron Quante Alex Breton alex latzko Allen Frank Amanda Taylor, Esq Andreas Mimra Andrew Phillips Anthony Adams Arni Bjorgvinsson audi4444player Blake T Brandon Fitzwater Brian Newton Carlo Chad Bryant Chris Simondet Grok Senften Haley McFadden Harper Kim Hunter R. Jason Koi Jason Tarlov Jeremy Cole Jonas Richartz Jordan Page justin f. Kelly Imgrund Kurt Gazow Marc Cerisier Marius Costan Martin Rønnow Klarlund Mellissa McConnell Michael Bier Mickey Eisenhorn Mike Donaldson Nick Cannon Pasacal Schmikal Philipp Schultes Thomas Scott Marshall Sergei Shvartsman Svenja Kuckla The Carlsons Trevor Kam Tucker Ifft Warren G Strand Jr William Wallace 웅록 윤 My camera: Panasonic HC-VX11 I payed a lot of attention on the lighting when filming this video and also the quality of the sound to create an ASMR style video. If you have any questions about the process, machines i'm using or other stuff, just ask me in the comments. I read them all and i try to reply as soon as possible. Sorry for my bad english, it's not my language. I try my best to improve my technical english. Subscribe for more of my content. I'm uploading videos about mechanical stuff, as new creations and buildings and also restorations. Thank you for watching :-) Building a Huge Rotary Tumbler from Scratch - Homemade Rotary Tumbler youtu.be/c04x6ZF9kKc „I make a new one“ T-Shirts: teespring.com/stores/my-mechanics My Main Channel: youtube.com/c/mymechanics My Second Channel: youtube.com/channel/UC4EQCwfH54ieNPswtXh5K0w My Patreon Page: patreon.com/mymechanics Follow me on Instagram: instagram.com/my_mechanics My Facebook Page: facebook.com/My-mechanics-1966277857002099