Channel: Rough Hands and Unusual Ideas

Category: Science & Technology

Tags: how to create ato makehow to5 productshandscutideaprojecthow to maketop 10housebladehow to make adiypensionerbest toolswoodfinishtutorialbest diy toolsamazing inventions5 inventionsnew inventionstablehandmulti-toolslevelmake amadetutorial diyimpactsawkniveshow to build aimprovementmulti-tool (consumer product)drilltoolhomebest hand toolsknifebuilding acreatingmake madecrazy

Description: Hello, everyone. For today's device, we will need a long bolt stud, 2 bolts, a screw nut, a metal rod, a piece of pipe, and a chain. Fix the pipe and one end of the chain in a vise. The chain should fit the pipe like this. Now we will solder these two parts together on one side and on the other. Take a screw nut and solder it to the edge of the pipe like this. Fix the pipe in a Vice. Screw the bolt into the screw nut to align it relative to the pipe and carefully solder one edge. We take a long bolt stud, insert it into the pipe and screw it into the nut. Now we solder the nut to the end. Using a grinder, cut off the extra part from the bolt stud. Take a metal rod and solder it to the cutted edge of the bolt stud. We will sand the welding places of all parts of our device. Insert the resulting handle into the pipe and tighten the nut. Stick 2 small bolts in the adjacent chain links in the center. We clamp the blank again in a vise and weld the bolts, slightly retreating from the edge of the pipe. Welding should be done very carefully, so that the chain links are not accidentally soldered. Remove the chain from the bolts and weld them on all sides. The links of the chain are strung freely on the bolts. Cut off the excess parts of the bolts with a grinder. And we'll grind the cut and the splice points. And also round off the end of the handle. Again insert the handle into the pipe, clamp the large bolt between the stud and the chain. Fixing the chain links. Now tighten the bolt stud. The bot is held firmly in the device. Let's try to Unscrew this non-standard rusty nut. Install it between the pipe and the chain, fasten the links, tighten the bolt stud. It Works Let's do the same with another rusty large-diameter nut. It Works. The bolt thread is not damaged. Now the test is more complicated. Let's take this non-standard nut, and screw it on a large bolt. Install it between the pipe and the chain, fasten the links, tighten the bolt stud. It Works Let's try to Unscrew this huge nut without damaging the thread. Install it between the pipe and the chain, fasten the links, tighten the bolt stud. Great! And how will our universal key cope with such a non-standard nut? We clamp it in a Vice, fix the device.Done! And finally, here is a thin large-diameter nut. If you are interested in this idea, don't forget to like and subscribe to the channel. See you soon. Hi, im a Pensioner . Apart from my work i like DIY stuff, lifehacks, how to make, experiments, well everything that can be made by hand in a home enviorment. This channel " Rough Hands and Unusual Ideas " about new and old ideas that you might have known . This channel is a HACK COLLECTION. It’s an entartainment oriented channel, so do not try to repeat at home everything you see, as it might be dangerous. So take care of your health.